|
Click to see the worlds only  non-electric, hydro powered massager! |
Why Pay Retail... Buy Manufacturer Direct and Save! Just plumb a 2" pipe "IN" from your Spa to the Pump Intake, and a 2" pipe "OUT" from the Pump Outlet to your Spa! Relax and Enjoy Your Reinvigorated Spa! |
|
FREE Freight* |
 Dimensions: L=19.0" x H=12.0" x D=8.5"
|
 PM5010 W=4.550" x L=9.75"  PM3002 W=3.250" x L=7.250"  PM6000 W=3.500" x L=9.000" |
| 1. Choose your options from the table below. | 2. Verify the model description. |
| 3. Change the quantity (if needed). | 4. Click 'Add to Order' button below the quantity. |
| 5. Click 'View Order' button to check and submit your order. | |
The Quick Set Spa Pack is designed to power Portable Spas at all levels.
This unique, compact and inexpensive design is the perfect solution to retrofit and upgrade your old spa equipment with the latest digital technology available for portable spas.
The Quick Set Spa Pack comes with at least one pump, a 5,500 watt heater and a digital control all in one unit and it takes less then 30 minutes to set it in the equipment bay of your portable spa.
You only need a 2.0”pipe from your spa to connect to the suction of the pump and another 2.0" pipe to connect to the discharge of the pump. Install your spa side control, connect the electrical, fill the spa and spa plumbing with water and enjoy your spa.
The
Mega e-Saver
digital control is also equipped to drive multiple pumps, blower, water purification system, stereo, fiber optic lighting and other accessories. Please check on the table provided for proper model suffix when ordering.
The
Mega e-Saver
digital control in its economy mode will only turn “On” the spa heater when it is necessary, as a result you minimize your electrical consumption and keep your spa at the desired temperature setting.
Our digital control will also provide you with four independent filter cycles in a 24 hour period, post use filtration so you can manually activate you filter cycle after each use of your spa, temperature calibration, AM/PM time of day, 100% memory when loosing power just reset your time of day except, trouble shooting guide, lock in desired temperature. In addition, our
Mega e-Saver
Digital Control offers features unmatched by any other system: Freeze Guard, Economy mode, Silent mode, Auto thermostat, Heater Cool-Down Cycle and many other features as well as an internal troubleshooting.
The Quick Set is powered by an SuperCharger pump.
The Quick Set is also powered by a 66” long coiled heating element with a 5,500 watt output at 240 volts. This unique low watt density electric heater is installed in the pump housing and is 100% efficient when transferring electrical energy to heat energy since it is 100% submerged in the water path. Our unique coiled heater design minimizes the friction loss of water flowing through the pump and optimizes the pumps performance. Unlike other spa heater housings where the heater inside the manifold restricts the water flow, forcing consumers to pay for higher horse-power pumps to maintain adequate hydraulic system pressure.
Consumers should be asking for the watt density of the electric heater and not just the wattage, a lower watt density means longer heater life time. Most spa manufacturers provide a 40" long heating element that has a watt density of 139, our heater has a watt density of 84 providing efficient heating with less strain on the heater.
Standard 2.0" PVC Pipe
Click here for help with the spa plumbing |
Part #1662 |
Exploded View & Part List
|
Dimensions: L=19.0" x H=12.0" x D=8.5" |
|
Easy to install...
Our spa packs fit in most portable spas verify the dimensions.
We have been manufacturing Hot Tub and spa packs since 1987.
Our 5.5kW spa heater is 73" long for longevity and not only 40" short like other standard spa packs.
Our digital hot tub packs are fully programmable, easy to operate and they come with operating instructions.
We are the only spa pack manufacturer to sell direct to the public.
NOTES:
All electrical work must be performed by a licensed electrician according to National Electrical Code
and all local codes and regulations.
All plumbing work must meet I.A.P.M.O., UL 1563, and all local codes and regulations
and must be performed by a licensed plumbing contractor.
All shipments are F.O.B. Riverside, California.
*Free Freight only for U.P.S. Ground in the USA. Other forms of shipping incur additional shipping costs.
 Canada |
 United States |
*Free Freight only for U.P.S. Ground in the USA. Other forms of shipping incur additional shipping costs.
A $5 Handling charge is applied to all orders.
All products sold per our "Terms and Conditions" found in the "Support" section of our menu.
Updated: 02/01/2010