|
Click to see the worlds only  non-electric, hydro powered massager! |
Megatrol™ Air Switching Not all Hot Tub controls are created equal! Buy manufacturer direct and save! We will beat any competitor's prices! |
|
 PM5010 W=4.550" x L=9.75"  PM3002 W=3.250" x L=7.250"  PM6000 W=3.500" x L=9.000" |
| 1. Choose your options from the table below. | 2. Verify the model description. |
| 3. Change the quantity (if needed). | 4. Click 'Add to Order' button below the quantity. |
| 5. Click 'View Order' button to check and submit your order. | |
The Megatrol™ Digital Hot Tub Control
we proudly offer today represents 21 years of research and experience in manufacturing
spa controls and hot tub controls.
Over two decades ago, we set out to design and manufacture reliable, inexpensive
and easy-to-use spa controls. We have achieved those goals and gone far beyond them in
our newest Megatrol™ series which is designed and produced with the highest
quality materials available in the market today. The injection molded rust-free enclosure equipped
with a 3.5" I.D. water manifold system reduces friction losses providing better
pump performance. The inlet and outlet for the heater manifold are provided with
2" or 2.5" tailpieces per you specification. The patented
Automatic Air Bleeder,
when properly installed on the Megatrol™ manifold, releases trapped air from the
heater manifold that could cause dry fire. This patented and unique feature is only
available through Acura Spa Systems. A series of troubleshooting lights are provided
on the upper front panel to easily diagnose most common electrical problems. The Megatrol™
is equipped with a 5,500 watt 69" long coiled heater that resulted in a lower watt per
square inch density heater when compared to other manufacturers 5,500 watt 40" long heaters.
The lower watt density provides longer life and less strain on the heater while producing the same
temperature output. Our optional patent pending chemical resistant titanium heater is also offered upon request.
The Megatrol™ offers patented and patents pending features unmatched by any other spa control or hot tub control.
For the spa manufacturer: Our hot tub control is reliable, low cost, easy to install.
For the dealer: Our spa control is easy to explain, easy to sell, easy to troubleshoot.
For the serviceman: Our hot tub control is easy to repair.
For the consumer: Our hot tub control is simple to operate and a pleasure to own!
Perhaps the Megatrol™ pneumatic system is a case may not be improved on perfection.
2.0" Intake and 2.0" Discharge Unions, Part #1677, are included unless 2.5" or 3.0" unions are requested.
Click here for help with the spa plumbing |
Part #1677 |
Click here for help with the spa plumbing |
Part #1679 |
Click here for help with the spa plumbing |
Part #1680 |
NOTES:
All electrical work must be performed by a licensed electrician according to National Electrical Code
and all local codes and regulations.
All plumbing work must meet I.A.P.M.O., UL 1563, and all local codes and regulations
and must be performed by a licensed plumbing contractor.
All shipments are F.O.B. Riverside, California.
 Canada |
 |
 United States |
*Free Freight only for U.P.S. Ground in the USA. Other forms of shipping incur additional shipping costs.
A $5 Handling charge is applied to all orders.
All products sold per our "Terms and Conditions" found in the "Support" section of our menu.
Updated: 02/02/2010